# Statum Model ## Statum Frames A statum frame consists of a JSON object with three keys: - `content`: a string containing the literal content of the frame. - `signer`: a string containing a signer ID. - `signature`: a base64 encoded signature verifying the content authored by the signer. ## Statum Slot - `key`: a server issued ID for the slot. - `scope`: a string value that can be one of: - `"device"`: persists between browser sessions. Backed by `localStorage`. - `"session"`: persists within the browser session (e.g. between tabs). Backed by `localStorage`, kept consistent across tabs via `BroadcastChannel`, and cleared on browser close via a session-cookie marker (see [Initialization](#initialization)). - `"flow"`: persists only within the current tab, while the tab remains on the site (e.g. persists between navigations). Backed by `sessionStorage` (per-tab, survives navigation, cleared when the tab closes). - `"page"`: persists only while the current page is loaded (e.g. clears on navigate). Held in memory. - `"transient"`: does not persist, will never get sent back to the server - random or `null` key each time. Held in memory. - `type`: an application defined type name. ## Statum Snapshot A statum snapshot captures an aspect of the application state at a particular point-in-time. It is usually wrapped in a frame, which must be retained if it is to be sent back to the server after the `transmit_after` time. It contains: - `as_at`: an ISO 8601 string representing the time the snapshot was authored. - `slot`: a slot object (above) - `transmit_after`: an ISO 8601 string representing the time the slot will no longer be cached by the server and the application will need to send the snapshot. `undefined` if this is a unidirectional snapshot that never needs to be sent to the server. If it equals `as_at`, then the snapshot must always be sent. - `invalid_after`: an ISO 8601 string representing the time this snapshot should be considered invalid and not used. - `private`: a base64 encoded string of data only readable by the application server. - `public`: a JSON object with application-defined key/values. This is the user-facing data that the JS and HTML APIs bind to. It may also contain embedded [Statum Actions](#statum-action), referenced by path (e.g. `typeName.deleteItem`). ## Statum Action - `uri`: The URI to request. - `method`: The HTTP verb to use. - `private`: A base64 encoded string of data only readable by the application server (can be `undefined`) ## Statum Directive - `type`: One of - `"navigate"`: Used to redirect the frontend to a new URI. - `"post"`: Used to perform a full-page form POST navigation to a URI. A `"post"` directive is always executed after all other directives in the same response. - `"set"`: Used to set a slot to a new snapshot. - `"clear"`: Used to clear a slot. - `"error"`: Used to report an error to the frontend. Depending on the type, it will have other properties. ### Navigate Directive - `uri`: The URI to navigate to. ### Post Directive - `uri`: The URI to perform a form post to. - `data`: Key/value pairs for form data. The post directive performs a full-page browser navigation via a real form POST, not an AJAX request, so its response is HTML and is not parsed for directives. Because it navigates away from the page, a post directive is always executed after every other directive in the same response has been applied. ### Set Directive - `snapshot_frame`: A frame containing a snapshot. ### Clear Directive - `key`: The key of the slot to clear. ### Error Directive - `message`: A human-readable error message (optional). - `code`: An application-defined error code (optional). - `data`: Additional key/value error details (optional). An error directive signals a failure to the frontend. When one is received, the `statum.act` promise for the originating action rejects and any `stm-on-error` handling on the originating element runs. An error directive returned from the entrypoint load is surfaced as a load failure. # Statum HTTP API All endpoints that return directives do so as a JSON array of Statum Directives, served with the Content-Type `application/vnd.statum+json`. The frontend uses this content type to distinguish a Statum directive response from an ordinary HTML or JSON response. ## Entrypoint Endpoint `GET /_statum/entrypoint`: Get initial directives based on the URL. Has query param `uri` set to the browser's current `window.location`. Returns a JSON array of Statum Directives. ## Slot Post Endpoint `POST /_statum/slots`: Send a saved state snapshots frame to the server once it has reached its `transmit_after` time window. Sent as a JSON array of Statum Frames. Returns a JSON array of Statum Directives. ## Action Endpoints The URLs of action endpoints are entirely defined by the action itself (in the `uri` property). An additional `X-Statum-Private` header should contain the `private` data of the action if present. Returns a JSON array of Statum Directives. ## Request Headers All HTTP API requests must carry an `X-Statum-Slot` header for each slot the client currently holds (i.e. every snapshot in scope for the current page/flow). Note that sending base64 frames in headers can approach practical header-size limits on some servers and proxies; very large frames are better refreshed via the slot post endpoint flow below. There are two variations of this header: - For slots whose snapshot is still within the `transmit_after` window, an `as_at` timestamp reference is sent, e.g. `X-Statum-Slot: key=d3cceb88-c211-41ee-a0b1-6a93f3b6331b; as_at=2026-07-06T07:33:02.332Z`. - For slots whose `transmit_after` equals its `as_at` timestamp (always-send), the frame is sent in base64, e.g. `X-Statum-Slot: eyAiY29udGVudCI6ICIuLi4uIiwgInNpZ25lciI6ICJzMSIsICJzaWduYXR1cmUiOiAiZXlBaVkyOXVkR1Z1ZENJNklDSXVMaTR1SWl3Z0luTnBaMjVsY2lJNklDSnpNU0lzSUNKemFXZHVZWFIxY21VaU9pQWlJbjA9In0=` ### Snapshot freshness decision For each held slot, the client compares the current time against the snapshot's timestamps: - `now < transmit_after` (and `transmit_after > as_at`): send the `as_at` reference header. - `transmit_after == as_at` (always-send): send the base64 frame header. - `transmit_after < now < invalid_after`: the server's cache for this `as_at` has expired. Before sending the request, issue a pre-flight request to the slot post endpoint; it returns `Set` directives (refreshed snapshots with new `as_at` values), after which the request proceeds with reference headers. - `now >= invalid_after`: the snapshot is no longer usable. Drop it locally, do not send a header for it, and refetch the slot via the entrypoint or an action response. Thus a pre-flight is made only when one or more held snapshots have passed their `transmit_after` time but have not yet reached their `invalid_after` time. # Javascript API The Javascript API provides access to the state and actions via the global `statum` object. It automatically handles pre-flight requests, headers, and executing directives from the server. Note that the Javascript library will also automatically make a request to the Statum Entrypoint URL on page load to get the initial states in order to fill out the page template. State is exposed to the application keyed by **slot type**. Statum assumes at most one slot per type, so each type name maps to a single current snapshot; the slot's `key` is used only on the wire (in headers and directives). ## Initialization On startup, before fetching the entrypoint or evaluating any bindings, the library checks for a `_statum_sdc` session cookie: 1. If the cookie is absent, this is a fresh browser session: clear all `"session"`-scoped slots from `localStorage`, then set `_statum_sdc=1` (a session cookie, so the browser drops it on close). 2. If the cookie is present, the browser session is already underway; do nothing. Because session cookies are shared across all tabs of a browser session, a tab opened mid-session sees the marker the first tab set and does not wipe session data. This step must run before anything else so stale session state is never read or sent. Caveats: browsers with a "continue/restore session" feature preserve session cookies across restarts, so in that mode stale session data may not be cleared on reopen; and if cookies are blocked entirely, `"session"` scope degrades to per-page-load. ## Managing State State snapshots can be cleaned up via `statum.clear("typeName")`. All snapshots can be cleared via `statum.clear()`. ## Reading State State can be read via `statum.read("typeName")` which returns the `public` data object currently associated with the type "typeName". This is the same value the HTML attributes bind to. To get the full snapshot object (including `as_at`, `slot`, `transmit_after`, etc.), use `statum.getSnapshot("typeName")`. To get the frame that wraps a snapshot, use `statum.getFrame("typeName")`. A full state object can be generated via `statum.state()` which returns a javascript object containing properties named after each type name that currently has a state, their values being that type's `public` data, e.g. `{ "typeName": { "label": "..." } }`. ## Performing an Action To perform an action, use `statum.act(action)` where `action` is a Statum action. Use `statum.act(action, data)` to send parameters along with the request. This is encoded as query params when `action.method` == `GET`, or encoded as form encoded otherwise. `statum.act` returns a promise which resolves when the request has completed and all directives have been run. The act function can also be used with a string referring to an action name ## Reacting to State Callbacks can be attached to statum using `statum.addStateListener("typeName", callback)` which calls `callback` with an object containing: - `type`: the type name - `frame`: the frame (can be `null` if state has been cleared) - `snapshot`: the snapshot object (can be `null` if state has been cleared). It is fired whenever a state of the specified type is set or cleared. A listener can be removed with `statum.removeStateListener("typeName", callback)`. For `"session"` and `"device"` scoped slots, state changes are propagated to other tabs in the same origin via a `BroadcastChannel`, so listeners fire in every tab, not just the one that performed the change. # HTML API The Javascript library also has some functionality inspired by HTMX using attributes prefixed with `stm-`. Usually their values refer to a value reached by following a path into a slot's `public` data, optionally combined with a loop variable (see [Loops](#loops)). The template is re-evaluated each time the state changes. ### Expressions Attribute values used as predicates (`stm-if`, `stm-else-if`, `stm-class.x`) are evaluated as JavaScript expressions against a scope built from the current state. Because the page's HTML is trusted, expressions are evaluated directly rather than via a restricted parser. In this scope each type name is bound to that slot's current `public` object, plus any in-scope loop variables. For example, `stm-if="typeName.level > 5"` evaluates `typeName.level > 5` with `typeName` bound to that type's `public` data. ## URL Overrides The attribute `stm-entrypoint` can be used *only* on the `` tag, to override the default entrypoint url of `/_statum/entrypoint`. Same goes for the `stm-slots` attribute, which can be used to override the default slot post url of `/_statum/slots`. ## Boot and Loading States The library fetches the entrypoint on load before the template is fully usable. Two attributes control element visibility around this: - `stm-preloader`: the element is shown until the entrypoint response has been processed, then hidden. - `stm-content`: the element is hidden until the entrypoint response has been processed, then shown. These allow a page to display a loading state while state is fetched, then reveal the bound content once it is available. ## Text binding The attribute `stm-text` binds the element's `innerText` to the specified state value, e.g. ``. ## HTML binding The attribute `stm-html` binds the element's `innerHTML` to the specified state value. ## Conditional display The attribute `stm-if` adds or removes the element from the DOM depending on the expression inside the statement, e.g. `
` or `
` The attribute `stm-else-if` can only exist as the next sibling of an element with either `stm-if` or `stm-else-if` and has the same type of value as `stm-if`. The attribute `stm-else` can exist only as the next sibling of an element with `stm-if` or `stm-else-if`. ## Conditional classes The attribute `stm-class.x` where `x` is any class name can be used to toggle classes on or off with a predicate, e.g. `
`. ## Actions The attribute `stm-action` binds the element's primary action (`click` for buttons and links, `submit` for forms), overriding the default behaviour to instead perform the Statum action referenced by the given path into state. For example ``. Additional data can be attached to the action using one or more `stm-data-{key}` attributes, where `{key}` is the data key and the attribute value is its value, e.g. ``. These values are merged with any form input values when the request is sent. The attribute will also disable the element (and any children) while the action is being processed, and restore the original state once completed (or on error). In addition to this, the attribute `stm-busy-class` can be used to specify one or more css classes to apply during this time, and `stm-on-error` can specify one or more css classes to apply while the element is in an error state (cleared the next time the action is attempted). The `statum.act` promise for the action also rejects on failure. When used on a form, any form inputs are sent in the JSON or query string of the action, bound by their `name`, as they would for a regular native form submission. ## Loops The `stm-for-{x}-in` attribute (where `{x}` is the loop variable name) repeats the *current* element once for each item in the referenced array, and binds the loop variable for use in all `stm-` attributes on its descendants, and in all other `stm-` attributes on the element itself. For example: ```html

``` When the referenced array changes, the loop is re-rendered. If a `stm-key="{expression}"` attribute is present, items are matched across renders by the key value, preserving DOM identity (and therefore focus, selection, and input state) for items whose key is unchanged. When no `stm-key` is given, the loop falls back to a full re-render.